CO2 Foaming MPP Porous Foam With Micron-Sized Bubbles For Aviation Model
FR-MPP foam sheet : the lithium-ion battery cell cushioning sheet
1. Sealing and fastening of battery housings
FR-MPP10 sheet is the preferred solution for sealing and protecting battery housings with very good compression and deformation properties, outputting stable stresses over a wide range of deformations to protect them from potential damage caused by the elements and road debris.
2. Matting on the bottom of the battery housing
Applied between the battery housing and the shield, the FR-MPP15 sheet is able to compensate for assembly tolerances and insulating cushioning.
3. Anti-shock pads to isolate vibrations
Packing is also required between batteries to absorb internal shock energy. Vibration must be managed both within the pack and between the pack and the vehicle. FR-MPP25 resists collapse caused by the stresses of compression and temperature, extending the life of the battery by continuing to seal and absorb shocks.
In addition,MPP self-fire retardant properties make it can also be used in the field of battery cell use.
Specification:
| Test Item | Test Method | Unit | Typical Values |
| Density | ISO 845:2006 | Kg/m³ | 30-100 |
| Hot Deformation Temperature | ISO 75-2 | ℃ | 120 |
| Thermal Conductivity | GB/T 10294-2008 | W/(m*k) | 0.04 |
| Water Absorption | CNS2536-1990 THE 3RD, 10TH SECTION | % | ＜0.10 |
| Chemical Resistance | / | / | Resistant to strong acids and alkalis |
| | MPP-10 | MPP-15 | MPP-25 |
| Density (kg/m³) | 85±15 | 59±11 | 38±8 |
| Hardness (°) | 79±5 | 70±5 | 59±7 |
| Compression Strength
(MPa) | 10%:0.26~0.78
50%:0.56~1.24
70%:0.80~1.72 | 10%:0.24~0.66
50%:0.40~0.90
70%:0.58~1.60 | 10%:0.08~0.27
50%:0.24~0.51
70%:0.38~0.76 |
| Tensile Strength(Mpa) | ≥3.5 | ≥2.5 | ≥1.5 |
| Shear Strength(Mpa) | ≥2 | ≥1.6 | ≥1.1 |
| Thermal Comductvity
(w/m.k) | 0.04 | 0.04 | 0.04 |
| Temperature Humidity Bias Test (85℃/85%RH 1000H) | The performance keep the same |
| Insulation Resistance | ≥500MΩ,Leakage of electricity＜1mA |
| Resilience | ≥30%
GB/T 1685, compression 50% keep 30days |
Application:
Power battery cushion
FAQ:
Q1:.Where is our port of loading?
Shekou or Yantian Port in Shenzhen
Q2:Is sample free?
Yes,we can offer free samples by small pieces.
Q3:How many kinds of foam could you provide ?
We are your one stop foam products supplier. We can provide IXPE foam, XLPE foam,,ESD foam,EVA foam,EPDM foam,NBR foam,CR foam,PU foam,MPP foam,MTPU foam, PVDF foam and PE foam products(foam camping mat,foam floating mat, foam wallpaper, car floor mat)
Product Tags:
|
|
CO2 Foaming Porous MPP Foam With Micron Sized Bubbles For Aviation Model Images
|
